Radio Shack 20-501 - Manual (Page 46)

Beyond the Basics 46
Follow these steps to clear a single frequency from
skip memory so the scanner stops on it during a
search.
Press HOLD to stop the search.
Press FUNC and or FUNC and to select
the frequency. L/O appears.
Press FUNC and L/O. L/O disappears.
To clear all the skip frequencies at once while
searching or search hold, press FUNC and then
press and hold L/O until the scanner beeps.
Notes:
• If you selected all frequencies to be skipped
within the search range, the scanner beeps 3
times and does not search.
• If you select more than 50 frequencies to skip,
each new frequency replaces a frequency previ-
ously stored, beginning with the first stored fre-
quency.
• Press FUNC and or FUNC and to select a
skipped frequency while HOLD appears.
L/O appears when you select a skipped
frequency.