Ricoh Aficio AP3200 - Manual (Page 52)

Setting Up the Printer
36
2
L
Close the right cover by pushing
the area as shown in the illustra-
tion.
M
If the duplex unit is already in-
stalled, close the unit.
N
Remove the adhesive tape holding
the bridge unit and cable and
packing material, and attach the
connector to the socket on the right
top side of the back of the printer.
O
Attach the connecting plate as
shown in the illustration.
Note
❒ The plate is fastened with a screw
when installing the finisher.
Installing SR510 (500-sheet
finisher)
Note
❒ If you install the finisher, the
bridge unit must be installed first.
A
Confirm that the box contains the
following items.
1. Finisher tray
2. Finisher stand
3. Output guide
4. Screws (2 pcs)
5. Stoppers (2 pcs)
• Installation Guide
B
Turn off the printer, and remove
all cables and cords from the
printer.
ZDEP240E
ZDEP250E
ZDEP260E
5
4
1
3
2
ZDEP280E