Ricoh Aficio AP3200 - Manual (Page 57)

Installing Options
41
2
D
Tilt the memory unit so that it is
thirty degrees perpendicular to
the slot (
A A A A), and push it forward
(
B B B B). It should click into place.
Note
❒ If the hard disk is already in-
stalled, remove the hard disk
first.
E
Attach the printer board cover
that was removed in step
CCCC, and
use a coin to fasten the six screws.
Note
❒ If you are now going to install
the hard disk, it is not necessary
to reattach the cover.
❒ After installing all options, print
a configuration page to confirm
the installation. If the new de-
vice is listed in the column of
configuration options, then it
has been properly installed. For
more information, see P.54
“Printing a Configuration Page”.
Installing Printer Hard Disk
Type 185
Important
❒ The hard disk can be damaged by
small amounts of static electricity.
Before touching it, ground your-
self by touching something metal
to remove static electricity from
you.
A
Confirm that the box contains the
following items.
• Hard disk
• Installation Guide
B
Turn off the printer, and remove
all cables and cords from the
printer.
C
Use a coin to remove the six
screws, and remove the printer
board cover.
Note
❒ The removed cover and screws
are required in step
G.
ZDEP110E
ZDEP101E
ZDEP100E