Ricoh SAVIN A741 - Manual (Page 24)

A741 16 Print Server Manual
•
See chapter 4.4.2, Make sure the operator of the A741 Repro System
has 'Administrator' rights
The A741 produces blank pages when printing
•
Re-install the LittleBear card in a different PCI slot, see chapter 4.4.3,
Select the correct PCI slot for the A741 Repro System card
Only a part of the Client window is shown, impossible to re-size to full
view
•
Check fontsize setting of display. See chapter 4.8 Cannot maximize
Client window
The Server program does not start (at Boot time or when started
manually from the Control panel)
•
See if the Littebear driver is started, see chapter 4.5, Starting
(stopping) Littlebear driver and rfxServer
See also chapter, 4.6 rfxServer will not start
4.4 Detailed corrective actions
4.4.1 Check the operation of the network
Server PC
Check if the network is operational, do this by double-clicking on the
'Network Neighborhood' icon. If you are connected to an existing network
you must see a list of computers in the network. If you run the Server PC
stand-alone you must see just one PC (the Server PC!). If not, check the
network setup of the PC, for a stand-alone Server PC see chapter: 2.9,
PC networking
Client PC
Make sure the Server PC is working and configured properly (including the
network connection).
Double-click on the 'Network Neighborhood' icon of the Client PC and see
if the Server PC is present, if not find-out why and correct the problem.
4.4.2 Make sure the operator of the A741 Repro System has
'Administrator' rights
The 'Administrator' rights are required on the Server PC only, not on the
Client PC's. Typical sign of this problem is an error message that the path
of the 'LOCAL SPOOL' directory cannot be found in the REGISTRY.
4.4.3 Select the correct PCI slot for the A741 Repro System card
It is known that the A741 Repro System PCI controller may not work
properly with all motherboards. Signs of trouble are problems with DMA
transfers (see chapter: 4.9.6,
Test command – F(ifo) ).
Until now this problem has only been seen on Pentium II systems, but may
be present with other type of processors as well.
Which boards will work correctly?
•
Systems with original Intel AL440LX Pentium II motherboards,
A typical board with problems is shown on the next page: