Ricoh SAVIN A741 - Manual (Page 45)

Print Server Manual 37 A741
9 Frequently Asked Questions: A741 Repro System overview
9.1 Network block diagram
From all computers we can print directly to the spool queue on the A741 Repro
System Print Server. The job is then printed based on the defaults as set by the
Local Client program. A client program running on the Print Server is referred to
as the Local Client and has some additional features enabled, such as scanning.
In order to fully control the print job (specify scaling, paper size, rotation etc.) the
job must first be printed to file on a computer. The print file must then be
imported into a Client propram after which the job details can be specified. The
print job is then submitted to the A741 Repro System server after which it is
printed.
The Client program is available only for the Windows NT environment, not for the
Macintosh or UNIX systems. (see also 12.1, 12.2)
Windows '95 Windows NT
Remote Client
UNIX (any) Macintosh
Xi REPRO Print Server
- Server (controls A741)
- Local client
- Scanning enabled