Ricoh SAVIN A741 - Manual (Page 26)

A741 18 Print Server Manual
4.6 rfxServer will not start
Due to an error of some kind it is possible that rfxServer will not start. In this
case, the Services applet will show an error message approx. 10-15
seconds after the rfxServer is started.
To find the reason why the rfxServer will not start, you can select one of the
3 options below:
See if the Littlebear driver is started (is a A741 Repro PCI card installed in
the system??) (see chapter 4.5,
Starting (stopping) Littlebear driver and
rfxServer)
•
Look in the event log file for a possible reason (see chapter: 4.7, Use of
the Event log )
•
Start the rfxServer from in a DOS box
♦
Open the 'Program Files\A741 Repro System' directory
♦
Create a shortcut to rfxServer
♦
Select the properties of this shortcut
♦
Add the command switch '–C 7' to the command line (after the
closing double-quote!)
♦ Close and then double-click on the shortcut to start rfxServer in a
DOS box.
Note: rfxServer will produce a lot of internal messages, some which
may look like errors. Only start rfxServer in this way if there are real
problems or if instructed to do so.