Roberts Gorden VANTAGE HE HE-125 - Manual (Page 7)

SECTION 1: H EATER S AFETY
1
SECTION 1: HEATER SAFETY
Your Safety is Important to Us!
This symbol is used throughout
the manual to notify you of possi-
ble fire, electrical or burn hazards.
Please pay special attention when
reading and following the warn-
ings in these sections.
Installation, service and annual inspection of heater
must be done by a contractor qualified in the installa-
tion and service of gas-fired heating equipment.
Read this manual carefully before installation, opera-
tion or service of this equipment.
This heater is designed for heating nonresidential
indoor or outdoor spaces. Do not install in residential
spaces. These instructions, the layout drawing, local
codes and ordinances, and applicable standards that
apply to gas piping, electrical wiring, venting, etc.
must be thoroughly understood before proceeding
with the installation.
Protective gear is to be worn during installation, oper-
ation and service. Thin sheet metal parts, including
the aluminum reflector portion of the heater and the
various venting components, have sharp edges. To
prevent injury, the use of work gloves is recom-
mended. The use of gloves will also prevent the
transfer of body oils from the hands to the surface of
the reflector.
Before installation, check that the local distribution
conditions, nature of gas and pressure, and adjust-
ment of the appliance are compatible.
1.1 Manpower Requirements
To prevent personal injury and damage to the heater,
two persons will be required for installation.
1.2 Safety Labels and Their Placement
Product safety signs or labels should be replaced by
the product user when they are no longer legible.
Please contact Roberts-Gordon or your ROBERTS
GORDON
® independent distributor to obtain
replacement signs or labels. See Page 1, Figure 1
through Page 2, Figure 2
.
FIGURE 1: Top and Bottom Panel Label Placement
Logo Label
Rating Plate Label
Bottom
Panel
Top Panel
Gas Connection Label
Description Part Number
Logo Label 91013201
Rating Plate Label 91010401
Gas Connection Label 91018122