Radio Shack Audio/ Video Remote Control - Manual (Page 2)

Need help? Call 1-888-284-8735
2
INTRODUCTION
Your RadioShack 6-in-One Smart Audio/Video (A/V)
Remote Control is both preprogrammed with the
most commonly used commands and equipped with
“smart technology” that lets you customize your re-
mote to suit your home entertainment needs.
Your 6-in-One can replace up to six infrared remote
controls. Use it to control your TV, VCR, cable con-
verter, satellite receiver, CD or DVD player, tuner,
phonograph, video accessory, digital audio tape,
cassette, or laser disc player from up to about 26 feet
(8 meters) away. It also has these features:
Four Smart Keys — can learn up to 24 features from
your original remotes (one for each key in up to six
device modes), so you can use the 6-in-One to per-
form functions that were not part of its original pro-
gramming.
Lighted Keypad — lets you easily see the remote’s
buttons in a dark room. With this feature on, pressing
any button lights the entire keypad.
Favorite Channel Scan — lets you program your re-
mote to automatically scan through 10 of your favor-
ite channels on a TV, VCR, or cable converter.
Sleep Timer — lets you set a device with or without
a built-in sleep timer to operate for 15-minute inter-
vals (up to 60 minutes), then automatically turn off.
This manual includes a list of many manufacturers’
4-digit codes for your devices. (If your brand is not
listed, see “Searching for a Code” on Page 48.) After
you enter the codes for your original remotes, the 6-
in-One Smart A/V Remote is ready to operate the
original remotes’ most used functions.
© 2000 Tandy Corporation.
All Rights Reserved.
Plug ’n Power and RadioShack are registered trademarks
used by Tandy Corporation.
RadioShack.com is a trademark used by Tandy Corporation
.
15-1994.fm Page 2 Tuesday, February 29, 2000 2:04 PM