Radio Shack Audio/ Video Remote Control - Manual (Page 7)

Need help? Call 1-888-284-8735
7
DEVICE TYPES
You can use the remote control's device keys to con-
trol these types of devices:
• TV — TVs
• VCR — VCRs and TV/VCR combinations, digital
video disc players, laser disc players, cassette
decks, digital audio tape players
• CBL/SAT — cable converters, satellite systems,
video accessories
• CD — CD players
• AUX 1 or AUX 2 — miscellaneous audio devices
(such as graphic equalizers and digital audio
service terminals)
• PLUG ’N POWER — home automation
Note: To enjoy the full benefit of the Plug ’n Power
feature, you must purchase additional equipment,
available at your local RadioShack store.
SETTING UP YOUR REMOTE
CONTROL
1. Refer to “Manufacturer Codes” on Page 17 and
write down the codes for your devices on the 6-
in-One’s label.
Note: Some manufacturers have several codes
listed. Try each until you find the right one. See
“Searching for a Code” on Page 48 if you cannot
find the correct code.
2. Turn on your TV.
3. Press the device key for the type of remote you
are replacing ( TV , VCR , CBL/SAT , CD , AUX 1 or
15-1994.fm Page 7 Tuesday, February 29, 2000 2:04 PM