Radio Shack CD-3904 - Manual (Page 7)

7 Connections
(neither supplied). Both are available
at your local RadioShack store.
Cautions:
You must use a (Class
2) power source that
supplies 4.5V DC and
delivers at least 600 mA. Its cen-
ter tip must be set to positive and
its plug must fit the CD player’s
DC IN 4.5V jack. Using an adapter
that does not meet these specifi-
cations could damage the CD
player or the adapter.
• Always connect the AC adapter
to the CD player before you con-
nect it to AC power. When you
finish, disconnect the adapter
from AC power before you dis-
connect it from the CD player.
Follow these steps to connect the CD
player to AC or DC power.
1. Insert the size B Adaptaplug into
the AC or DC adapter’s cord so it
reads TIP +.
2. Set the adapter’s voltage switch
to 4.5V, as necessary.
3. Insert the barrel plug into the CD
player’s DC IN 4.5V jack.
4. Depending on the type of
adapter you are using, plug the
other end of the adapter into a
standard AC outlet or a 12V
power source.
ˆ
Connections
You can listen to your CD player by
connecting optional earphones, head-
phones, or amplified speakers to the
CD player’s
PHONES jack, or by con-
necting a home audio or vehicle’s
sound system to the CD player’s
LINE
OUT jack.
Note: If the jacks on your equipment
do not match the plugs on the sup-
plied Y-cable, check with your local
RadioShack store for the proper ca-
ble adapter.
CONNECTING
EARPHONES OR
HEADPHONES
For private listening, connect option-
al earphones or headphones with a
1 / 8 -inch (3.5-mm) plug into the
PHONES jack on the CD player.
Listening Safely
To protect your hearing, follow these
guidelines when you use an ear-
phone or headphones.
!
42-6004.fm Page 7 Friday, July 21, 2000 1:18 PM