Connecting amplified speakers, Connecting to a home audio system, Connecting to an auto sound system – Radio Shack CD-3904 User Manual

Page 8: Traffic safety

Advertising
background image

8

Connections

• Set the volume to the lowest set-

ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable
level.

• Do not listen at extremely high

volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.

• Once you set the volume, do not

increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage
your hearing.

Traffic Safety

Do not wear an earphone or head-
phones while operating a motor vehi-
cle or riding a bicycle. This can create
a traffic hazard and could be illegal in
some areas.

Even though some earphones or
headphones let you hear some out-
side sounds when listening at normal
volume levels, they still can present a
traffic hazard.

CONNECTING
AMPLIFIED SPEAKERS

You can listen to your CD player
through amplified speakers. Plug the
speaker cable’s

1

/

8

-inch (3.5-mm)

plug into the CD player’s

PHONES

jack.

CONNECTING TO A
HOME AUDIO SYSTEM

You can listen to your CD player
through your home audio system’s
amplifier/receiver and full-size speak-
ers. Connect the supplied Y-cable’s

1

/

8

-inch (3.5-mm) plug to the CD play-

er’s

LINE OUT

jack. Then connect the

Y-cable’s phono plugs to your audio
system’s left (white) and right (red)
CD, AUX, or TV audio input jacks.

CONNECTING TO AN
AUTO SOUND SYSTEM

You can listen to your CD player
through your vehicle’s sound system
in one of the following ways:

• If your auto sound system has

LINE IN jacks, connect the sup-
plied Y-cable’s

1

/

8

-inch (3.5-mm)

plug to the CD player’s

LINE OUT

jack. Then connect the Y-cable’s
phono plugs to your auto sound
system’s LINE IN input jacks.

• If your auto sound system has a

CD input jack, connect one end
of a

1

/

8

-inch (3.5-mm) stereo

patch cable to the CD player’s

LINE OUT

jack. Then connect the

other end to your auto sound
system’s CD INPUT jack.

To avoid sound distortion, set

VOL-

UME

to the lowest comfortable listen-

ing level and adjust it as necessary.

42-6004.fm Page 8 Friday, July 21, 2000 1:18 PM

Advertising