Radio Shack 66 User Manual
Page 24
24
2. While holding down
TV
, enter the code
number for your TV using the number but-
tons. Or, while holding down
DSS/CABLE
enter the code number for your cable box
or direct-to-home satellite receiver.
Precede a single-digit code number with a
0 — for example, 01, 02, and so on. To
enter a three-digit number, press
100
, then
enter the second and third digits in the
code number.
3. Try operating your TV and cable box or
direct-to-home satellite receiver using the
VCR’s remote control. First press
TV
or
DSS/CABLE
, then try pressing
POWER
,
INPUT
,
CH
s or t, and
VOL +/–
for TV opera-
tion; or
POWER
and
CH
s or t for cable box
or direct-to-home satellite receiver opera-
tion.
If the device does not function, repeat Step
2 and try other codes for the manufacturer.
If it still does not function, you must use the
original remote control supplied with your
TV and cable box or direct-to-home satel-
lite receiver.
To use the remote control, press the button for
the device you want to control—
TV
,
DSS/CABLE
,
or
VCR
. Then press the desired function button.
Notes:
• The codes you programmed might be
erased if you remove the batteries from the
remote control (to replace them, for exam-
ple). If this happens, re-enter the codes
after you replace the batteries.
• Some TVs, cable boxes, and direct-to-
home satellite receivers might require that
you manually turn on the power for that
device.
• Your TV, cable box, or direct-to-home sat-
ellite receiver might have functions that the
VCR’s remote control will not operate.
• You can use the number buttons to select a
channel number on your TV and cable box
or direct-to-home satellite receiver. How-
ever, some TVs and cable boxes or direct-
to-home satellite receivers might require
that you press
DISP/ENT
after entering the
channel number.
•
VOL +/–
works to adjust the TV volume in
any operation mode (VCR, TV, or CATV).
• When you press
TV
or
DSS/CABLE
then
press
MENU/ACTION
or
PROG
,
NOW
TV/
CABLE/DSS
MODE
PLEASE
PUSH
VCR
KEY
ON
REMOTE
appears, and TV or
CAbL
flash for about 5 seconds then dis-
appear. Press
VCR
to set the remote con-
trol to VCR operation mode.
Universal
42, 43, 44, 52, 63, 88
Viewstar
13, 20, 22, 26, 40, 58,
62, 98
Videoway
07, 23, 50
Vid Tech
64
Vidter
64
Zenith
07, 23, 50
SATELLITE
RECEIVER
BRAND
CODE
Hitachi/Hughes
104
Magnavox/Uniden
1
105
Magnavox/Uniden
2
106
Panasonic
109
RCA
108
Sony
107
Toshiba
103
CABLE BOX
BRAND
CODE
16-635.fm Page 24 Wednesday, July 21, 1999 9:03 AM