Radio Shack 66 User Manual
Page 42
42
4. Press
PROG.
You see:
Note: If the clock is not set,
PLEASE
SET
CLOCK
BEFORE
PROGRAMMING
ap-
pears, then the clock-setting screen ap-
pears. Set the clock as described in “Man-
ually Setting the Clock” on Page 19, then
continue with Step 5.
5. If necessary, press
or
to highlight
VCR Plus+
PROGRAM
, then press
.
6. Find the PlusCode in your television guide
for the broadcast you want to record, then
use the number keys on the remote control
to enter the PlusCode.
Note: If you make a mistake while entering
a PlusCode, repeatedly press
to delete
the PlusCode number, then re-enter the
correct PlusCode number.
7. Press
PROG
.
8. Press
1
,
2
, or
3
on the remote control to
select the desired program mode (
ONE
TIME
,
DAILY
(MON-FRI)
, or
WEEKLY
).
You see the recording time and date corre-
sponding to the PlusCode you entered.
Notes:
•
INVALID
ENTRY
flashes under the
PlusCode on the TV screen if you enter
an invalid PlusCode, or if the PlusCode
and program mode do not match (for
example, if you enter the PlusCode for a
Saturday broadcast and select the
DAILY (Monday-Friday) program mode).
• To erase a VCR Plus+ program, press
ADD/DLT
.
9. Repeatedly press
or
to select a pre-
set program category that you see when
you view the program index —
DRAMA
,
MUSIC
,
COMEDY
,
MOVIE
,
SPORTS
, or
N/A
(not applicable). Then press
.
10. If you want to change the displayed tape
speed, repeatedly press
or
on the
remote control until the speed you want
(
SP
,
LP
, or
SLP
) flashes.
11. Repeat Steps 4
–
10 for each PlusCode you
want to enter.
12. Press
PROG
twice.
TURN
VCR
OFF
FOR
TIMER
RECORDING
appears on the TV
screen. (If you connected a cable box to
the VCR,
AND
LEAVE
CABLE
BOX
POWER
ON
also appears).
13. Press
POWER
to turn off the VCR’s power.
TIMER
appears.
Important:
• Be sure that the VCR displays
TIMER
when you turn it off. If it does not appear,
check your programming.
• If you set the VCR to record a CATV pro-
gram through a cable box or direct-to-
home satellite receiver, be sure to leave
the cable box or direct-to-home satellite
receiver turned on before the timer pro-
gram starts.
• If the VCR is not set to select channels on
your cable box or direct-to-home satellite
receiver, be sure to leave the cable box or
direct-to-home satellite receiver turned on
and set it to the channel you want to
record.
• The VCR only records with VCR Plus+
when the VCR is off at the recording start
time.
GRAM
AM
Y
Y
RAM
- - - - - -
00P12: 00P 125
ART STOP CH
ABC
SP
- - - - - - - -- - - - - - -
KEY
KEY
ROG KEY
TE
TEGORY
N / A
16-635.fm Page 42 Wednesday, July 21, 1999 9:03 AM