Radio Shack Radio - Manual (Page 10)

10
USING THE STATION MEMORIES
You can store up to 20 stations (10 FM and 10 AM) into memory and
quickly recall each. Follow these steps to store a station.
1. Turn on the radio and select a band (see “Tuning the Radio” on Page
9).
2. Press TUNING + or – to tune to the station you want to store.
3. Press MEM/TIME . MEMO flashes.
4. Within 5 seconds, repeatedly press
SELECT until the number for the desired
memory location ( 1–10 ) appears. (Or, you
can simply press a number button ( 1–5 ) to
store a station in a memory location from 1
through 5.) The memory number appears
on the display.
5. Press MEM/TIME again to store the station.
Note: If you do not store a station within 5 seconds, MEMO disap-
pears. Repeat Steps 3–5.
To tune to a stored station, press a number button, or repeatedly press
SELECT until the number ( 1–10 ) for the desired memory location ap-
pears.
To replace a stored station, store a different station in its location.
USING LOCK
To avoid accidentally changing the station, set
LOCK to . This prevents the station from be-
ing changed.
illustration
illustration
illustration