Operation, Tuning the radio – Radio Shack Radio User Manual
Page 9
9
OPERATION
TUNING THE RADIO
1. Turn
VOLUME
to its lowest setting, then lift
and fully extend the antenna.
2. Press
POWER
to turn on the radio. The last
tuned frequency appears.
3. Slide
BAND AM/FM
to the desired band.
4. If you selected the FM band, set
SENS
(Sensitivity) to
DX
or
LOC
.
• DX (distant) – to receive weak (distant) signals
• LOC (local) – to receive strong (local) signals
Note:
SENS
only works for FM reception.
5. Press
TUNING
+
or
–
to tune up or down to
the desired station.
To automatically tune the radio to the next
strong signal, hold down
TUNING
+
or
–
for
about 2 seconds.
6. Rotate
VOLUME
to a comfortable level.
7. Slide
TONE
to
HI
or
LO
to suit your listening preference.
8. To turn off the radio, press
POWER
again.
illustration
illustration
illustration
illustration
illustration
illustration