Technical data – Ryobi 325HE3X-series User Manual
Page 20
20 –
English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
Technical data
325HDA55
325HE3
325HE4
Engine
Cylinder displacement, cm
3
24,5
24,5
24,5
Cylinder bore, mm
34
34
34
Stroke, mm
27
27
27
Idle speed, rpm
2700
2700
2700
Recommended max. speed, rpm
9500-10500
9500-10500
9500-10500
Max. speed;should not be exceded, rpm
10800
10800
10800
Max. engine output, acc. to ISO 8893
0,9/9000
0,9/9000
0,9/9000
Catalytic converter muffler
Yes
Yes
Yes
Speed-regulated ignition system
Yes
Yes
Yes
Ignition system
Manufacturer/type of ignition system
WalbroMB/SEM AM49
WalbroMB/SEM AM49
WalbroMB/SEM AM49
Spark plug
NGK BPMR 7A
NGK BPMR 7A
NGK BPMR 7A
Electrode gap, mm
0,5
0,5
0,5
Fuel and lubrication system
Manufacturer/type of carburettor
Zama C1Q
Zama C1Q
Zama C1Q
Fuel tank capacity, litre
0,5
0,5
0,5
Weight
Weight without fuel, cutting attachment and guard, kg 5,5
5,7
5,8
Noise emissions
(see note 1)
Sound power level, measured dB(A)
105
104
105
Sound power level, guaranteed L
WA
dB(A)
105
105
105
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
92
93
91
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916, m/s
2
Idle speed, rear/front handles:
3,5/1,8
3,8/1,4
2,2/1,8
Max. speed, rear/front handles:
3,1/5,7
4,7/5,5
7,5/6,6
Blades
Length, mm
550
550
550
Blade speed, cuts/min
4184
4184
4184