Ricoh FT 1008 - Manual (Page 15)

Remove the toner cassette from the
vinyl bag.
l
Keep the vinyl bag for repacking.
Rock the toner cassette back and
forth five or six times.
Set the toner cassette on a flat
surface and remove the two tapes
inside the unit completely as
shown.
l
Hold the toner cassette firmly with one
hand to prevent it from turning over.
l
Yellow marks appear at the end of the
tapes. Make sure to remove the tapes
completely from the toner cassette.
If these tapes are not removed,
the toner cassette may be damaged, and
unable to make a copy.
Open the top unit.
Confirm that the A mark of the
toner cassette is pointing upward.
Align guides on both sides of the toner
cassette with the left (with
l mark)
and right (with mark) guides of
the toner cassette holder, then insert
the toner cassette into the copier as
shown until it clicks into place.
l
Do not insert the toner cassette into the
copier until the tapes are completely
removed.
Close the top unit by pressing
down firmly on the marked posi-
tion.
Attention: Make sure to press the marked
position.
16