Ricoh FT 1008 - Manual (Page 8)

1.Photo Mode Indicator 4.Copy Counter
2.Auto Image Density
5.Start Indicator
Indicator
6.Start
Toner Indicator Key
Clear/Stop Key
Indicators
Path Indicator
8.Image Density
Adjustment Key
1.
Photo Mode Indicator: Lights
up when photo mode is selected
with image density indicator.
(See page 28.)
2.
Auto Image Density Indica-
tor: Lights up to show copier is
in automatic image density
mode. (See page 28.)
3 .
Replenish Toner Indicator:
Replenish toner when this indica-
tor lights up. (See page 42.)
4 .
Copy Counter: Indicates the
number of copies.
Shows reduction/enlargement
size in % in zooming mode
(Type 2 panel only);
display
tells you to replenish paper, and
displays other data.
5.
Start Indicator: Lights green
when copier is ready to make
copies.
8
6.
Start Key: Press to start copy-
ing.
7.
Manual Image Density Indi-
cators: Lights up when image
density is adjusted manually.
(See page 28.)
8.
Image Density Adjustment
Key: Used to adjust image
density. (See page 28.)
9 .
Check Paper Path Indica-
tor: Lights up to indicate paper
jam. To clear paper misfeeds,
see page 60.
10. +
and - keys: Used to increase
or reduce the desired number of
copies. Or type 2 only, for
reduction or enlargement in 1%
increments. (See page 30.)
Clear/Stop Key: Press to reset
the counter to 1. During copy-
ing, press to stop copying.