Ricoh FT 1008 - Manual (Page 24)

To make copies the same size as your originals.
Lift the platen cover and place the
original face down on the exposure
glass. Align the center of your
original with the arrow mark on the
scale. Lower the platen cover.
If your copier includes an enlarge-
ment/ reduction feature (Type 2
panel only), make sure the magni-
fication ratio is set to Full Size. If
not, press the Reduce/Enlarge
key until Full Size indicator is lit.
Enter your desired number of copies
using the + key (to increase copy num-
ber) or - key (to reduce copy number).
l
Up to 50 copies can be entered.
l
To reset the number to 1, press the Clear/
Stop key.
l
When copy counter is 1, pressing the -
key changes the counter to 50. Likewise,
0
when the-counter is 50, pressing the + key
3
changes the counter to 1.
Press the Start key.
l
To stop the machine during a multi-copy
run, press the Clear/Stop key.
l
To resume copying, press the Start key.
l
To clear the copy counter, press the
Clear/Stop key.
Auto Start - Setting Copy Orders During Warm-Up
If you press the Start key during warm-up, the
Start indicator will blink in red and green. The
copier will start copying when warm-up is
completed.
l
To cancel Auto Start, press the Clear/Stop key.