Ricoh CAPLIO G4 WIDE - Manual (Page 14)

Chapter 1 Section 1 Getting Started
14
To turn the camera On
Press the power button.
The flash lamp and auto-focus lamp will alternate for
several seconds.
To turn the camera Off
Press the power button.
Auto Power-off
• If the camera goes unused for a set period of time, it will automatically turn itself off to save power. To use the camera again, simply
press the power switch.
• At time of purchase, the Auto Power-off function is set to one minute.
• The Auto Power-off function does not work when connected to your computer.
Power-Save Mode
• You can reduce the power consumption of the LCD Monitor and extend the life of your batteries.
• If you have activated Power-Save mode, the display on the LCD Monitor will turn off in Shooting Mode. When the LCD Monitor is dark,
turn the SETUP Dial to check the Power-Save mode setting.
• For how to change the Auto Power-off time, see P.116.
• For how to set the Power-Save Mode, see P.121.
Turning the Power On/Off
The camera is switched On and Off as follows.