Ricoh CAPLIO G4 WIDE - Manual (Page 22)

Chapter 1 Section 1 Getting Started
22
Switching the Screen Display
If you press DISP, you can change the screen display mode, such as switching between display/no dis-
play of symbols, etc.
When Shooting
• In Synchro-Monitor Mode, with the exception of the following operations, the LCD Monitor is turned off (No Display). This
is a useful mode to reduce power consumption.
• You cannot turn the LCD Monitor Display on/off by pressing T (Self-timer), F (Flash) or N (Macro) buttons.
• Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.
• In Voice Memo Mode, you can turn the LCD Monitor Display off by pressing the DISP button.
When Playing Back
Half-press the shutter button. The LCD Monitor is tuned on and you can confirm composition. After you finish shooting with
Full-Press, the LCD Monitor will automatically turn off.
Press the Q (Quick Review) button. You can view the photo you just took (see P.87). By pressing the Q (Quick Review) button
again, you can turn the LCD Monitor off.
Press the M button. The LCD Monitor Display is turned on and you can make various settings for shooting (see
P.24). By pressing the M button again, you can turn the LCD Monitor off.
ADJ. Button. The LCD Monitor Display is turned on and you can make settings for exposure control, white
balance, and ISO sensitivity (see P.55, 58, and 63). Pressing the OK button turns the LCD
Monitor off.
Display Symbols No Display Grid Guide Display Synchro-Monitor Mode
DISP button
When the No Display or Grid Guide Display is on, symbols will appear for a few seconds right after you have pressed Self-timer, Flash or
Macro button.
For how to display the grid guide, see P.83.
No Display Display Symbols
DISP button