Radio Shack CD-8150 - Manual (Page 17)

17
Checking/Changing the
Programmed Sequence
Press STOP to cancel the current
function. Press MEMORY CHECK . The
CD changer displays the programmed
sequence’s first selection. Each time
you press
MEMORY CHECK , the CD
changer displays the next pro-
grammed selection.
To change a selection, repeatedly
press
MEMORY CHECK until the CD
changer displays the disc number and
track number you want to change. En-
ter the desired disc number and/or
track number, then press
MEMORY .
Adding to the Programmed
Sequence
You can add individual tracks or entire
CDs to the end of a programmed se-
quence up to a total of 32 tracks.
1. Repeatedly press STOP until
0:00 appears. This cancels the
current function.
2. Enter the desired disc number
and/or track number, then press
MEMORY . The CD changer adds
the selection to the end of the pro-
grammed sequence.
Erasing a Programmed
Sequence
To erase the programmed sequence
from memory, press
STOP then
CLEAR . The MEMORY indicator turns
off. The sequence is also erased
when you turn off the CD changer.
illustration
illustration
42-5071.fm Page 17 Thursday, August 12, 1999 10:45 AM