Radio Shack CD-8150 - Manual (Page 5)

5
Polarization — This product is
equipped with a polarized AC line plug
(a plug having one blade wider than
the other). This plug will fit in the pow-
er outlet only one way. This is a safety
feature. If you cannot insert the plug
fully into the outlet, try reversing the
plug. If the plug still doesn't fit, contact
your electrician to replace your obso-
lete outlet. Do not defeat the safety
purpose of the polarized plug. If you
need an extension, use a polarized
cord.
Power-Cord Protection — Route
power-supply cords so they are not
likely to be walked on or pinched by
items placed on or against them, pay-
ing particular attention to cords at
plugs, convenience receptacles, and
the point where they exit from the
product.
Nonuse Periods — Unplug the CD
changer’s power cord when you will
not use it for extended periods.
Lightning — For added protection for
this product during a lightning storm,
or when it is left unattended and un-
used for long periods of time, unplug it
from the wall outlet and disconnect the
antenna or cable system. This will pre-
vent damage to the product due to
lightning and power-line surges.
Overloading — Do not overload wall
outlets, extension cords, or integral
convenience receptacles, as this can
result in a risk of fire or electric shock.
Objects and Liquids — Never push
objects of any kind into this product
through openings, as they may touch
dangerous voltage points or short out
parts that could result in a fire or elec-
tric shock. Never spill liquid of any
kind on the product.
Servicing — Do not attempt to ser-
vice this product yourself, as opening
or removing covers may expose you
to dangerous voltage or other haz-
ards. Refer all servicing to qualified
service personnel.
Damage Requiring Service — Un-
plug this product from the wall outlet
and refer servicing to qualified service
personnel under the following condi-
tions:
• When the power-supply cord or
plug is damaged.
• If liquid has been spilled or objects
have fallen into the product.
• If the product has been exposed
to rain or water.
• If the product does not operate
normally by following the operat-
ing instructions. Adjust only those
controls that are covered by the
operating instructions, as an im-
proper adjustment of other con-
trols may result in damage and
will often require extensive work
by a qualified technician to restore
the product to normal operation.
• If the product has been dropped
or damaged in any way.
42-5071.fm Page 5 Thursday, August 12, 1999 10:45 AM