Radio Shack CENTRAL 49-2570 - Manual (Page 15)

15
6. Leave the console’s switch set to
INSTALL to install other accesso-
ries.
7. Replace the compartment cover.
Note: You can install eight keychain
(Cat. No. 49-2591) or handheld remote
controls (Cat. No. 49-2551T).
INITIALIZING THE DOOR/
WINDOW SENSOR
TRANSMITTERS
1. Open a door/window sensor
transmitter’s battery compartment.
Install two AA alkaline batteries
(Radio Shack Cat. No. 23-557).
2. Be sure the console’s INSTALL/
RUN 1/RUN 2 switch is set to
INSTALL .
3. Stand near the console and press
TEST , located to the right of the
sensor transmitter’s battery com-
partment. The console chimes
and logs in the door/window sen-
sor transmitter. The first available
zone indicator on the console
lights to show which zone the sen-
sor transmitter is assigned to.
Note: If you do not hear a chime,
remove the batteries from the sen-
sor transmitter and then hold
down the
TEST button for 3 sec-
onds. Reinstall the batteries and
press
TEST again. When the indi-
cator flashes twice, you can initial-
ize the sensor transmitter as
described in Step 3.
4. Set DELAY , located inside the
door/window sensor transmitter’s
battery compartment, to
MIN to
protect a window or to MAX to pro-
tect a door. Then replace the bat-
tery compartment’s cover.
TEST
MAX MIN
DELAY
+
– +
–
TEST
MAX MIN
DELAY
+
– +
–
TEST
MAX MIN
DELAY
49-2570.fm Page 15 Wednesday, August 18, 1999 3:59 PM