Sony ICF-CD3IP User Manual

Fm/am cd clock radio, Icf-cd3ip, Features

Advertising
background image

WARNING

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or

moisture.

To reduce the risk of fire, do not cover the

ventilation of the apparatus with newspapers,

tablecloths, curtains, etc. And do not place lighted

candles on the apparatus.

To reduce the risk of fire or electric shock, do not

expose this apparatus to dripping or splashing,

and do not place objects filled with liquids, such

as vases, on the apparatus.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

As the main plug is used to disconnect the unit

from the mains, connect the unit to an easily

accessible AC outlet. Should you notice an

abnormality in the unit, disconnect the main plug

from the AC outlet immediately.

Notice for customers: the following

information is only applicable to equipment

sold in countries applying EU directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart, Germany.

For any service or guarantee matters please refer

to the addresses given in separate service or

guarantee documents.

WARNING

 Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

 Replace the battery for the clock backup with a

Sony CR2032 lithium battery, and the battery

for the remote commander with a Sony CR2025

lithium battery. Use of another battery may

present a risk of fire or explosion.

 Battery may explode if mistreated. Do not

recharge, disassemble or dispose of in fire.

 Do not expose the batteries (battery pack or

batteries installed) to excessive heat such as

sunshine, fire or the like for a long time.

 Dispose of used battery promptly. Keep away

from children.

“CAUTION-CLASS 1M INVISIBLE LASER

RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS”

Features

 Brightness control (High/Mid/Low)

 Supplied audio cable for digital music players

 Built-in CD player with CD-R/RW playback

function

 FM/AM 2-band digital tuner

 30 Station Presets (20 FM, 10 AM)

 Automatic Time/Daylight Saving Time Setting

 No Power No Problem Alarm System

 Extendable Snooze time from 10 to 60 min

Precautions

 Play the unit on the power source specified in

“Specifications”.

 To disconnect the AC power cord (mains lead),

pull it out by the plug, not the cord.

 The unit is not disconnected from the AC

power source (mains) as long as it is connected

to the wall outlet, even if the player itself has

been turned off.

 The nameplate and important information

concerning safety are located on the bottom

exterior.

 Since a strong magnet is used for the speaker,

keep personal credit cards using magnetic coding

or spring-wound watches away from the unit to

prevent possible damage from the magnet.

 Do not leave the unit in a location near a heat

source such as a radiator or airduct, or in a

place subject to direct sunlight, excessive dust,

mechanical vibration, or shock.

 Allow adequate air circulation to prevent

internal heat build-up. Do not place the unit on

a surface (a rug, a blanket, etc.) or near

materials (a curtain) which might block the

ventilation holes.

 Should any solid object or liquid fall into the unit,

unplug the unit and have it checked by qualified

personnel before operating it any further.

 To clean the casing, use a soft cloth dampened

with a mild detergent solution.

 Never touch the wire of the external FM aerial

during a thunderstorm. Furthermore,

immediately disconnect the AC power cord

from the radio.

NOTES ON LITHIUM BATTERY

 Wipe the battery with a dry cloth to assure a

good contact.

 Be sure to observe the correct polarity when

installing the battery.

 Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Disposal of Old Electrical &

Electronic Equipment (Applicable

in the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over

to the applicable collection point for the recycling

of electrical and electronic equipment. By

ensuring this product is disposed of correctly, you

will help prevent potential negative consequences

for the environment and human health, which

could otherwise be caused by inappropriate waste

handling of this product. The recycling of

materials will help to conserve natural resources.

For more detailed information about recycling of

this product, please contact your local Civic

Office, your household waste disposal service or

the shop where you purchased the product.

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the battery or on the packaging

indicates that the battery provided with this

product shall not be treated as household waste.

By ensuring these batteries are disposed of

correctly, you will help prevent potentially

negative consequences for the environment and

human health which could otherwise be caused

by inappropriate waste handling of the battery.

The recycling of the materials will help to

conserve natural resources.
In case of products that for safety, performance or

data integrity reasons require a permanent

connection with an incorporated battery, this

battery should be replaced by qualified service

staff only. To ensure that the battery will be

treated properly, hand over the product at end-of-

life to the applicable collection point for the

recycling of electrical and electronic equipment.
For all other batteries, please view the section on

how to remove the battery from the product

safely. Hand the battery over to the applicable

collection point for the recycling of waste

batteries.
For more detailed information about recycling of

this product or battery, please contact your local

Civic Office, your household waste disposal

service or the shop where you purchased the

product.

If you have any questions or problems concerning

your unit, please consult your nearest Sony dealer.

Troubleshooting

Should any problem persist after you have made

the following checks, consult your nearest Sony

dealer.
The clock flashes “12:00” due to a power

interruption.
 The battery is low. Replace the battery. Remove

the old battery and install a new one.

The CD, radio, iPod or buzzer alarm does not

sound at the preset alarm time.
 Check that “ALARM A” or “ALARM B” is

properly displayed.

The CD, radio or iPod alarm is activated but

no sound comes on at the preset alarm time.
 Has VOLUME been adjusted?
The CD player does not operate.
 Did you close the CD compartment lid?

 Did you insert the disc correctly?

The disc should be inserted with the label side

up.

 Dusty or defective disc — Clean the disc with

an optional cleaning cloth. Wipe the disc from

the center out.

 Take out the CD and leave the CD

compartment open for about an hour to allow

condensation to evaporate.

There is no sound from the iPod.
 Make sure the iPod is securely connected.

 Adjust the VOLUME.

The iPod cannot be operated with this unit.
 Make sure the iPod is securely connected.

The iPod cannot be charged.
 Make sure the iPod is securely connected.
When daylight saving time begins, the clock

does not employ the daylight saving time

automatically.
 Make sure the clock is set correctly.

 Press and hold CLOCK and BRIGHTNESS

simultaneously for at least two seconds to

employ the DST function.

Specifications

CD player section

System

Compact disc digital audio system
Laser diode properties

Emission duration: Continuous

Laser output: Less than 44.6 µW(This output is

the value measurement at a distance of 200 mm

from the objective lens surface on the optical

pick-up block with 7 mm aperture.)
Number of channels

2
Frequency response

20 - 20 000 Hz +1/–2 dB

Wow and flutter

Below measurable limit

iPod section

DC out: 5V

MAX: 500mA (AC only)

Radio section

Frequency range

Band

Frequency

Channel step

FM

87.5 – 108 MHz 0.05 MHz

AM

531 – 1 611 kHz 9 kHz

General
Time display

12-hour system
Speaker

Approx. 3.8 cm (1

1

/

2

inches) dia. 20 Ω

Input

AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output

1 W + 1 W (at 10% harmonic distortion)

Power requirements

230 V AC, 50 Hz

For clock back up: 3 VDC one CR2032 battery

Dimensions

Approx. 145 Ч 156.8 Ч 115.8 mm (w/h/d)

(5

3

/

4

Ч 6

1

/

4

Ч 4

5

/

8

inches) not including

projecting parts and controls
Mass

Approx. 1.3 kg (2 lb 13 oz) including power

supply unit
Supplied accessories

Remote commander (1)

AM loop aerial (1)

Audio connecting cable (1)

Universal dock adapter for iPhone (1)

Universal dock adapter for iPhone 3G (1)
Design and specifications are subject to change

without notice.

Compatible iPod models

The compatible iPod models are as follows.

Update your iPod to use the latest software before

you use it.

iPod nano

5th generation

(video camera)

iPhone 3GS

iPod touch

2nd generation

iPod nano

4th generation

(video)

iPhone 3G

iPod touch

1st generation

4-115-539-34(1)

©2008 Sony Corporation Printed in China

ICF-CD3iP

FM/AM CD

Clock Radio

Operating Instructions

Dream Machine is a trademark of Sony Corporation.

Preparing the remote

commander

Before using the card remote commander for the

first time, remove the insulation film. (See Fig.

-)

When to replace the battery

With normal use, the battery (CR2025) should

last for about six months. When the remote

commander no longer operates the unit, replace

the battery with a new one. (See Fig. -)

Notes
 Do not charge the battery.

 When you are not going to use the remote

commander for a long time, remove the battery

to avoid any damage caused by leakage and

corrosion.

3

Push the exhausted battery out from the

bottom of the battery holder and insert a

new battery with the  side facing up.

(See Fig. -)

4

Insert the battery holder back into the

unit and secure it with the screw. (See

Fig. -)

5

Press CD, iPod&iPhone, RADIO BAND,

AUDIO IN or SNOOZE/DATE/SLEEP

OFF to turn “

” off in the display.

If the time in the display is

incorrect after the battery is

changed (Reset)

Press the Reset button with a pointed device. The

Reset button is in the small hole located in the

battery compartment.

Note

If you replace the battery, do not disconnect the

plug from the AC outlet. Otherwise, the calendar,

current time, alarm and station presets will be

initialized.
Battery Warning

If the unit is to be left unplugged for a long time,

remove the battery to avoid undue battery

discharge and damage to the unit from battery

leakage.
WARNING

There is a danger of explosion if the battery is

incorrectly replaced.

Replace only with the same or equivalent type

recommended by the equipment manufacturer.
If the battery compartment lid comes off

The battery compartment lid is designed to come

off when opened with excessive force. To put it

back on, see the illustration.

1

Insert the left hook of the lid into the left

hole in the unit.

2

Insert the right hook into the right hole.

3

Confirm the lid is securely attached.

iPod nano

3rd generation

(video)

iPod classic

iPhone

iPod nano

2nd generation

(aluminum)

iPod

5th generation

(video)

iPod nano

1st generation

iPod

4th generation

(color display)

iPod

4th generation

iPod mini

Notes
 In these Operating Instructions, “iPod” is used

as a general reference for the iPod functions on

the iPod and iPhone, unless otherwise specified

by the text or illustrations.

 The connector of the unit is for sole use for

iPod. When you use devices that do not match

with the connector, connect to the AUDIO IN

terminal of this unit with the supplied audio

connecting cable.

 Sony cannot accept responsibility in the event

that data recorded to iPod is lost or damaged

when using an iPod connected to this unit.

Connecting the aerial

To connect the AM loop

aerial

The shape and the length of the aerial is designed

to receive AM signals. Do not dismantle or roll up

the aerial.

1

Remove only the loop part from the

plastic stand.

2

Set up the AM loop aerial.

3

Connect the cords to the AM aerial

terminals.

Cord (A) or cord (B) can be connected to

either terminal.

A

B

Only insert up

to here.

Insert the cord while

pushing down the

terminal clamp.

4

Make sure the AM loop aerial is

connected firmly by pulling softly.

Adjusting the AM loop aerial

Find a place and an orientation that provide good

reception.

 Do not place the AM loop aerial near the unit

or other AV equipment, as noise may result.

Tip

Adjust the direction of the AM loop aerial for best

AM broadcast sound.

The CD, iPod & iPhone and

VOLUME + buttons have a tactile dot.

CR2025

About the backup

battery

To keep good time, this unit contains one CR2032

battery inside of the unit as a backup power

source.

The battery keeps the clock operating in the event

of a power interruption.
Note for customers in the UK

The clock is preset at the factory, and its memory

is powered by the preinstalled Sony CR2032

battery. If the “AM 12:00” appears in the display

when the unit is connected to AC outlet for the

first time, the battery may be weak. In this case,

consult a Sony dealer. The preinstalled CR2032

battery is considered part of the product, and is

covered by the warranty.

You are required to show “Note for customers in

the UK” (in this instruction) to a Sony dealer in

order to validate the warranty for this product.

Knowing when to replace the

battery

When the battery becomes weak, “” appears in

the display.

If a power interruption occurs while the battery is

weak, the current time and alarm will be

initialized.

Replace the battery with a Sony CR2032 lithium

battery. Use of another battery may cause a fire or

explosion.
Note

If “12:00” flashes in the display when the unit is

connected to AC outlet for the first time, the

battery may be weak. In this case, consult your

Sony dealer.

Replacing the battery

1

Open the CD compartment lid. (See Fig.

-)

2

Keep the AC plug connected to the AC

outlet and use a screwdriver to remove

the screw that secures the battery holder

at the bottom of the unit. (See Fig. -

)

CR2032

Advertising