Renesas Single-Chip Microcomputer M37900T2-RPD-E - Manual (Page 15)

( 15 / 52 )
2.2 Package Components
The M37900T2-RPD-E package consists of the following items. When unpacking, check to see if
your M37900T2-RPD-E contains all of these items.
Package components
Please keep this product's packing box and cushion material in your place for reuse at a later time
when sending your product for repair or other purposes. Always use these packing box and cushion
material when transporting this product.
If any of these items are missing or found faulty, please contact your local distributor. Also, if there
is any question or doubt about the packaged product, contact your local distributor.
2.3 Other Tool Products Required for Development
To bring forward programs development on the 7900 Series MCUs, the products listed below are
necessary in addition to those contained package above. Get them separately.
To purchase these products, contact your nearest distributer.
Emulator main unit
Emulator debugger
Pod probe
Converter board
PC4701
M3T-PD79 (V.2.10 or greater is recommended)
M379xxTx-PRB (xx: varies with MCU)
(Pod probe which matches to the MCU group is necessary)
The converter board which matches to the foot pattern of the
target system is necessary.
Item
M37900T2-RPD-E emulation pod main unit
FLX120-RPD flexible cable for connecting PC4701
OSC-3 oscillator circuit board (20 MHz)
OSC-3 oscillator circuit board (26 MHz)
OSC-2 oscillator circuit board (bare-board)
Hardware tool user registration FAX sheet (English/Japanese)
M37900T2-RPD-E user's manual (this manual)
M37900T2-RPD-E user's manual (Japanese)
Quantity
1
1
1
1
1
1
1
1