2 connecting the pod probe and emulation pod – Renesas Single-Chip Microcomputer M37900T2-RPD-E User Manual

Page 24

Advertising
background image

( 24 / 52 )

3.2 Connecting the Pod Probe and Emulation Pod

The 7900 Series emulation pod consists of the following 2 products. How to connect them is shown
in Figure 3.7.

(1) Emulation pod:

M37900T2-RPD-E

(2) Pod probe:

M379xxTx-PRB (designed for each MCU group)

Figure 3.7 Connecting pod probe

(1) Unscrew the 4 screws of the M379xxTx-PRB.

(2) Connect the connectors J3, J4 of the M379xxTx-PRB

and connectors J1, J2 of the M379xxTx-PRBM to the
connectors J3, J4 of the M37900T2-RPD-E's FLX100
and connectors J5, J6 of the M379xxTx-PRB,
respectively.

(3) Fix the M379xxTx-PRB with 4 screws.

Advertising
See also other documents in the category Renesas Hardware: