Important – Renesas Single-Chip Microcomputer M37900T2-RPD-E User Manual

Page 35

Advertising
background image

( 35 / 52 )

IMPORTANT

Note on Self-check:

• If the self-check does not result normally (excluding target status errors), the

emulation pod may be damaged. Contact your local distributor.

(2) If an Error is Detected in the Self-check

If the self-check does not result normally (ERROR 1 and ERROR 2 in Figure 4.3), check the
following.

• Check the connection of the emulation pod and the PC4701.

• Check the connection of the emulation pod and the pod probe.

• Redownload the proper firmware.

• Check if the switches in the pod probe are set same as the factory-setting (refer to the user's

manual of the pod probe).

Advertising
See also other documents in the category Renesas Hardware: