Rinnai 16e - Manual (Page 4)

4
UNPACKING RINNAI WATER HEATER
• After unpacking the appliance check for damage, if the heater is damaged contact
your supplier immediately. Do not install a damaged appliance before checking
with your supplier.
• One remote control and heater accessories pack are inside the carton.
• Check that the appliance supplied is the correct gas type for the installation. Refer
to the data plate located on the left-hand side of the appliance.
• Remove the heater and the accessories from the carton, and check that all the
parts are included . The remote control cable is provided with spade connectors.
Quantity Diagram Description
1
Temperature con-
troller MC-91-1A
1 Cable clamp
1 Cable Clamp
5 Spade connectors
1
Control cable 20
metres
1 Clamp screw
Unit Mounting Fasteners
5 Screw
5 Screw
Remote Control Parts
Quantity Diagram Description