Roland VP-770 - Manual (Page 110)

110
Reset to Default Factory Settings
( FACTORY RESET)
This restores all data in the VP-770 to the factory-set condition (Factory Reset).
If there is important registration data you’ve created that’s stored in the VP-770, all such registration
data is discarded when a Factory Reset is performed. If you want to keep the existing data, save it on
a USB memory (p. 103) or record the bulk dump to your MIDI sequencer (p. 107).
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “Factory Reset,”
then press the [F2] (ENTER) button.
The Factory Reset screen will appear.
Press the [F1] (OK) button to execute the Factory Reset.
If you decide not to execute the Factory Reset, press the [F2] (CANCEL) button.
When the display indicates “Completed!” the Factory Reset has been completed.
Never turn off the power until the Factory Reset process has been completed.
*
1.
2.
3.
*