Roland VP-770 - Manual (Page 95)

95
System Settings
( SYSTEM)
message reception. Here we’ll explain the procedure for making system settings and what each system
parameter does.
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “System,” then press the
[F2] (ENTER) button.
The SYSTEM screen will appear.
Use the cursor buttons or the value dial to select menu, then press the
[F2] (ENTER) button.
The parameters are organized into several edit groups.
Menu Description Page
MIDI Makes settings related to MIDI input/output. p. 97
Sound Makes settings related to sound output. p. 98
Metronome Makes metronome-related settings. p. 98
Control Makes settings for controllers such as the pedals and D Beam. p. 99
Use the cursor buttons to move the cursor to the parameter that you
want to edit.
If not all parameters can be shown in a single screen, a scroll bar is shown at the right edge of the
screen. In this case, use the cursor [
] button to scroll the screen downward.
Use the value dial to change the value.
You can change the value in steps of one by pressing the cursor buttons [ ] or [ ]. If you want
to quickly increase the value, hold down [ ] and press [ ]. Conversely, you can quickly decrease
the value by holding down [ ] and pressing [ ]. You can change the value in larger steps by
holding down [SHIFT] and pressing [ ] or [ ].
Repeat steps 3–5 to edit the parameters as desired.
If you want to save the changes you made, refer to “Saving the
System Settings” (p. 96).
1.
2.
3.
4.
✍
5.
✍
6.
7.