RAD Data comm IPmux-1 - Manual (Page 104)

Appendix E Parameters and Screens IPmux-1/1E Installation and Operation Manual
E-6 General Configuration
PING
Enter Destination IP And Press Enter.
Destination IP: 1.1.1.2
Use Space Bar to Choose Ping Repetitions
Ping Repetitions: Endless Repeats
Pinging.
--------------------------------------------
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out
Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
|Ping Result:Host 1.1.1.2 Request Timed Out|
--------------------------------------------
Scrolling Up
ESC. Stop Pings
Figure E-8. Ping Dialog Box
E.3 General Configuration
Host IP
➤ To configure the Host IP address and IP Mask:
1. Type the IP Address.
2. Type the IP Mask.
HOST IP
1. IP Address 192.168.217.12
2. IP Mask 255.255.255.0
ESC. Exit
Select item from the menu:_
Figure E-9. Host IP Menu
➤ To change a configured Host IP:
• Set the device to the default settings.
Frames are not sent until IP and Mask addresses are defined.
Note
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
1. Host IP
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com