RAD Data comm IPmux-1 - Manual (Page 14)

Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual
1-6 Overview
IPmux-16 Telephony Switch
BRI
ISDN
Phones FXS
E1/T1
IPmux-1
IPmux-1E
IPmux-1E
Ethernet
Switch IP Network
Internet
Switch
Figure 1-6. Ethernet-based Multi-tenant Application with Voice and Data Integrated Access
Features
IPmux-1/1E is a 1U high, easy-to-install standalone unit. A rack mount installation
option is available.
IPmux-1 can be ordered with AC or DC power supply. IPmux-1E is only available
with AC power supply.
Management
IPmux-1/1E can be managed locally by connecting an ASCII terminal to the
RS-232 port on the front panel or remotely via Telnet or SNMP. The SNMP
management capability enables fully graphical, user-friendly management using
the RADview network management stations offered by RAD, as well as
management by other SNMP-based management systems.
T1
The T1 port and framers comply with ANSI T1.403 standards. T1 jitter
performance is according to G.704, G.824, TR-62411. The T1 framers support
pass-through, SF, ESF and CAS framing. The T1 port supports long haul and short
haul input signals and can be monitored for alarms and error statistics. FDL and
transmit PRM for T1/ESF are also supported.
E1
The E1 port complies with G.703, G.704, and G.823 standards. E1 framers comply
with G.704. The E1 framers support pass-through, framed, CRC4 MF and CAS MF
framing. The E1 port supports long haul and short haul input signals and can be
monitored for alarms and error statistics.
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com