RAD Data comm IPmux-1 - Manual (Page 56)

Chapter 3 Operation IPmux-1/1E Installation and Operation Manual
3-10 Overview of Menu Operations
Main Menu
Figure 3-8 shows the IPmux-1/1E Main Menu. Access all system configuration and
control functions via this menu.
At any point and from any screen, you can press <Esc> repeatedly, backing up
until you reach the main menu.
You exit the program only from this menu. In order to prevent unauthorized
access, it is recommended that when you finish a session, you return to the Main
Menu and type 4 to exit the program. A password is then required for reentry.
MAIN MENU
1.System >
2.Configuration >
3.Performance Monitoring >
4.Exit
Select item from the menu: _
Use keys <1> to <4>
Figure 3-8. IPmux-1/1E Main Menu
The Main Menu options are:
1
. System View and modify system parameters
2 . Configuration Define system configuration
3 . Performance Monitoring Monitor system performance
4 . Exit Exit the control software
System Menu
➤
To access the System menu:
• Type 1 (System) in the Main Menu.
From the System menu you can view and configure the following options:
1
. General Information View IPmux-1/1E general information.
2 . Self-Test Results Review self-test results obtained during system
power-up.
3 . Reset Reset IPmux-1/1E.
4 . Event Log View a list of IPmux-1/1E events.
5 . Ping Ping other network devices.
These options are explained in full detail in Appendix E.
Main Menu
↓
1. System
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com