Raritan Computer Home Security System - Manual (Page 323)

305
If you have a CC-SG and Power IQ, there are severals ways to use them
together.
1. Control power to Power IQ IT devices via CC-SG.
For example, if you want to control power to a Power IQ IT device
which is also a CC-SG node, you can use a Power IQ Proxy interface
to give power control commands in CC-SG.
2. Use CSV file imports and exports to share data between these two
systems.
For example, if you have a CC-SG with a large number of Dominion
PX devices deployed on the IP network, you can export a CSV file
from CCSG that contains all the node names, edit the file to
specifications, then import it into Power IQ. See
Export Power IQ
Data (see "Export Dominion PX Data to Use in Power IQ" on page
308).
Or, if you have Power IQ with a large number of Dominion PX
devices deployed, and you want to get the current IT Device Names
into CC-SG as nodes, you can export a file from Power IQ, edit the
file to specifications, then import it into CC-SG. See
Import Power
Strips from Power IQ (on page 307).
In This Chapter
Power Control of Power IQ IT Devices .................................................305
Importing and Exporting Dominion PX Data from Power IQ .................306
Power Control of Power IQ IT Devices
You can use CC-SG to control power to a Power IQ IT device that you've
added to CC-SG as a node.
This enables you to control power to nodes connected to PDUs not
managed by CC-SG.
Configuring Power IQ Services
You must configure the Power IQ Service before you can add Power IQ
proxy interfaces to nodes. This is done via the CC-SG Access menu.
To configure Power IQ services:
1. In the CC-SG Admin Client, choose Access > Power IQ Services >
Add Power IQ Services. The New Power IQ Services Configuration
dialog appears.
Chapter 17 Power IQ Integration