Troubleshooting – Ryobi 510r User Manual

Page 20

Advertising
background image

TROUBLESHOOTING

20

C A U S E

A C T I O N

Ignition switch is OFF

Turn switch to ON

Empty fuel tank

Fill fuel tank

Primer bulb wasn't pressed enough

Press primer bulb fully and slowly 5-7 times

Engine flooded

Use starting procedure with choke lever in the
RUN position

Old gasoline

Drain fuel tank and add fresh gasoline

Fouled spark plug

Replace or clean the spark plug

ENGINE WILL NOT IDLE

ENGINE WILL NOT ACCELERATE

C A U S E

A C T I O N

Air filter is plugged

Replace or clean the air filter

Old gasoline

Drain fuel tank and add fresh gasoline

Improper carburetor adjustment

Adjust carburetor

C A U S E

A C T I O N

Old gasoline

Drain fuel tank and add fresh gasoline

Improper carburetor adjustment

Take to an authorized service dealer for
carburetor adjustment

Dirty air filter

Clean or replace the air filter

Clogged spark arrestor screen

Clean or replace

C A U S E

A C T I O N

Old gasoline

Drain fuel tank and add fresh gasoline

Improper carburetor adjustment

Take to an authorized service dealer for
carburetor adjustment

Cultivator tines bound with dirt or grass

Stop the unit, switch the On/Off Stop Control to
STOP, clean and remove any debris binding the tines

ENGINE WILL NOT START

ENGINE LACKS POWER OR STALLS WHEN UNDER LOAD

C A U S E

A C T I O N

Oil fill plug/dipstick loose or missing o-ring

Tighten oil fill plug/dipstick, replace o-ring

SIGNS OF OIL AROUND OIL FILL PLUG/DIPSTICK

Advertising