Cd-related problems, Continued) – Roland CD-2e User Manual

Page 114

Advertising
background image

114

Troubleshooting

(continued)

CD-Related Problems

(continued)

Problem

Cause and Action

See

Page

Can’t record

●

Could the CD be upside down?

➔

Insert the CD with the label facing upward.

27

●

Could you be attempting to record on a CD-R/RW disc that has already
been finalized?

➔

Use a blank or un-finalized CD-R/RW disc.

➔

If you want to record on a CD-R/RW disc that has already been finalized,
you’ll need to remove finalization so that the disc can be recorded to
again.

—

78

●

Is it possible that the maximum recordable time or number of tracks
(maximum of 99 tracks) has already been exceeded?

➔

If there are unwanted tracks on the disc, delete them before you
continue recording. (This is only possible on a CD-RW disc.)

76

●

Could you be attempting to record or erase a CD-RW disc more times
than it is capable of?

➔

A CD-RW disc can be recorded and erased approximately 1,000 times.

—

●

Could you be attempting to record an extremely short performance?

➔

You can’t record for less than four seconds.

35

●

Are you using a generic CD-R/RW disc?

➔

Use a CD-R/RW disc from a recommended manufacturer.

123

After recording, the CD
won’t play back on a
conventional CD player

●

Did you finalize the disc after recording?

➔

Execute the Finalize operation.

83

●

Is your CD player able to play back CD-R or CD-RW discs?

➔

If your CD player does not support CD-R or CD-RW discs, they may not
play back correctly.

—

The disc tray will not
open

●

Is the CD-2e powered up?

➔

Turn on the power of the CD-2e.

➔

If a power failure has occurred, you can use the emergency eject hole to
open the disc tray manually.

21

28

CD-R/RW drive produces
significant mechanical
noise when operating

●

Could you be using a high-speed compatible CD-RW disc?

➔

If you’re using a high-speed compatible CD-RW disc, performing the
following operations will cause the disc to rotate at high speed,
producing a greater level of mechanical noise. This is not a malfunction.

• When you stop recording

• When you assign a song number

• When you delete a track

• When you finalize

If you find the mechanical operating noise of the CD-R/RW drive
objectionable, please use an 8x compatible CD-R disc or a 1-4x
compatible CD-RW disc.

—

CD-2e_e.book 114 ページ 2007年10月24日 水曜日 午前11時16分

Advertising