Roland CD-2e - Manual (Page 90)

90
Joining Songs
This operation join two songs, making them into a single
song. The song will be joined with the following song.
fig.SDedit-combine-e.eps
1
Insert the SD memory card that you want to edit, and press the
[SD CARD] button.
SD becomes the audio source.
2
Use the [ ] [ ] buttons to select the song you want to join.
This song will be joined with the song that follows it.
3
Press the [MENU] button to access the menu screen, and choose
“Combine?”
fig.menu-combine-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Combine?”
Press the [ENTER] button to confirm your choice.
4
If you’re sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.combine-mssg-e.eps
The display will show “Processing...” and the songs will be joined. When the operation
is completed, you’re returned to the audio source screen.
A B C
1 2 3
Join
A
1 2
B + C
Track
Number
Track
Number
Progress indication
● This editing process will take a certain amount of time. The time required for this operation
will be approximately half the playback time of two songs you’re joining. For example, if
you’re joining a five-minute song and a three-minute song, processing will take
approximately four minutes.
● Joining two songs will require free space equal to the size of the two songs being joined.
For example, if you’re joining a five-minute song and a three-minute song, you won’t be
able to execute this operation unless you have at least eight minutes of recording time
remaining.
● This operation cannot be performed if the SD memory card’s write protect switch (Page
25) is in the “LOCK” position.
Important
CD-2e_e.book 90 ページ ２００７年１０月２４日 水曜日 午前１１時１６分