Radio Shack TAD-729 - Manual (Page 24)

24
DIALING A MEMORY
NUMBER
To dial a number stored in handset’s
memory, lift the handset and press
MEM .
The list of memory location numbers ap-
pears. Choose a memory location (01–
20) by pressing a number or by repeat-
edly pressing or , then press
TALK .
You can also dial a memory number af-
ter pressing
TALK . Press MEM (the dis-
play does not change but the phone is in
memory recall mode) then enter a mem-
ory location number.
To dial a number stored in the base’s
memory, press
SPEAKER . When you
hear a dial tone, press MEMORY and en-
ter the memory location number for the
number you want to dial.
Note: If you select an empty memory lo-
cation, the base beeps 5 times.
CHAIN-DIALING SERVICE
NUMBERS
For quick recall of numbers for special
services (such as bank by phone), store
each group of numbers in its own mem-
ory location. Dial the service’s main
number first. Then, at the appropriate
place in the call, press
MEM (or MEMO-
RY on the base) and enter the number
for the location where the additional in-
formation is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.