Radio Shack TAD-729 - Manual (Page 30)

30
To record a memo, hold down MEMO on
the base until the TAD beeps and ––
appears in the message counter win-
dow, then speak your message. When
you finish the memo, press
PLAY/STOP
or MEMO .
Note: The TAD-729 cannot record a
memo less than two seconds long.
RECORDING A
CONVERSATION
The TAD-729 lets you record both sides
of a telephone conversation when you
are talking with the handset.
Important Note: It is illegal in some ar-
eas to record a conversation without the
consent of all parties to the conversa-
tion, including the phone company.
Check the laws in your area before you
use the two-way recording feature.
To start recording a phone conversation,
hold down
MEMO on the base until the
TAD beeps and –– appears.
To stop recording, press PLAY/STOP or
MEMO . The TAD-729 stores a recorded
conversation as a message (see “Play-
ing Messages”).
Note: The TAD-729 cannot record a
conversation less than two seconds
long, or a call using the speakerphone.
PLAYING MESSAGES
After the TAD-729 has recorded a mes-
sage, its message counter shows the to-
tal number of messages stored. If you
have new messages, the number flash-
es. To play your messages, press
PLAY/
STOP . The TAD announces the number
of new and old messages, then plays
the new messages. The message num-
ber appears as each message plays,
and the TAD announces the day and
time of the call at the end of each mes-
sage.
To play all messages after playing the
new messages, press
PLAY/STOP again.
To skip to the next message, press
SKIP during playback.
To replay the current message from the
beginning, press
REPEAT . If you press
REPEAT within about 4 seconds after a
message begins playing, the TAD re-
plays the previous message.
MEMO
PLAY/STOP