Radio Shack TAD-729 - Manual (Page 28)

28
TAD OPERATION
SELECTING THE
OUTGOING MESSAGE
The TAD has two prerecorded outgoing
messages. One asks the caller to leave
a message: “Hello, no one is available to
take your call. Please leave a message
after the tone.” The TAD uses this mes-
sage when
REC TIME is set to 1 or 4 (see
“Setting the Record Time”). The other is
simply an announcement and does not
let the caller leave a message: “Hello,
no one is available to take your call.”
The TAD uses this message when
REC
TIME is set to ANN (announcement
only).
You can also record your own message
(see “Recording/Deleting an Outgoing
Message”). When you record your own
outgoing message, the TAD uses it for
all
REC TIME settings.
To switch between your outgoing mes-
sage and the TAD’s prerecorded mes-
sage, press
OGM . When the current
message begins to play, press OGM
again. The TAD switches to the other
message and plays it.
RECORDING/DELETING
AN OUTGOING MESSAGE
To record your outgoing message (up to
30 seconds long), hold down
OGM until
the TAD beeps and -- appears. When
you finish your message, press PLAY/
STOP or OGM . The TAD plays back your
message.
To delete your outgoing message and
use the TAD’s prerecorded messages,
hold down
OGM until the TAD beeps.
Then press OGM again within two sec-
onds.
SETTING THE RECORD
TIME
Set REC TIME to 1 , 4 , or ANN to deter-
mine how the TAD-729 will record in-
coming messages.
1 — The TAD plays the outgoing mes-
sage and lets callers leave a message
up to 1 minute long.
4 — The TAD plays the outgoing mes-
sage and lets callers leave a message
up to 4 minutes long.
ANN (announcement only) — The TAD
plays the outgoing message but does
not let callers leave a message.
REC TIME
OGM