Oregon Scientific Dual Band RF Projection Clock with FM Radio RRM326P User Manual
Page 4
EN
4
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
•
2 x UM-3 / AA 1.5V batteries
NOTE
It is recommended that you use alkaline batteries
with this product for longer performance.
Insert batteries before first use, matching the polarity
(+ and -) as shown below. Press RESET after each
battery change.
NOTE
Do not use rechargeable batteries with this
product.
BATTERY ICON
MEANING
Batteries are low, or there are no
batteries installed and only the
adaptor is connected
AC ADAPTOR
The batteries serve as a back-up power supply. For
continuous use of the projector, install the AC adaptor at
the base of the unit as shown below.
NOTE To help conserve energy, turn the PROJECTION
ON
switch to OFF when you do not wish to use it.
ABOUT RF RECEPTION
This clock can automatically synchronize the date and
time with official time-keeping organizations in Frankfurt
(Germany) and Rugby (England). The unit can pick up a
Radio Frequency (RF) signal when it is within 1500km
(932 miles) of these locations.
RRM326P_EN_output
03/09/2005, 14:44
4