Oregon Scientific Dual Band RF Projection Clock with FM Radio RRM326P - Manual (Page 6)

EN
6
2. Press VOL or to change the setting.
3. Press MODE to confirm the setting and move onto
the next one.
4. The settings appear in the following order: Time zone
hour offset, 12 / 24 hour format, hour, minute, year,
MM / DD or DD / MM format, month, day and
language for day of the week.
5. Press ALARM, ALARM ON / OFF, TUNING or ,
SLEEP , or RADIO to exit the Clock Setting Mode.
FM RADIO
This product has a built-in FM radio for your entertainment.
In order to conserve power, the FM radio only works
when the AC adaptor is plugged in.
OPERATING THE RADIO
1. Press RADIO to switch the radio on.
2. Press VOL or to change the radio volume.
3. Press TUNING or to change radio frequency,
press and hold for 2 seconds to enable auto-search
for an available frequency.
4. Press any key to stop auto-search.
RADIO STATIONS
To set a radio station, press and hold STATION while on
a frequency. The unit can store up to 8 preset stations in
chronological order.
Press STATION to return to the last station that you
listened to. Use the STATION button to scroll through the
8 preset stations.
SLEEP
The radio is equipped with a countdown sleep timer that
can be set to switch the radio off after up to 120 minutes.
1. Press SLEEP to enter sleep mode.
2. Use the SLEEP button to change the sleep time
setting (120, 90, 60, 45, 30, 15, 0).
3. Press any key to exit sleep mode – the sleep timer
will be automatically activated.
BACKLIGHT
Press SNOOZE / LIGHT to activate the backlight for 5
seconds.
RRM326P_EN_output 03/09/2005, 14:44 6