Onkyo DV-S501 - Manual (Page 15)

Connections
Introduction
15
VIDEO OUT
S VIDEO
R
L
ANALOG
OUTPUT PCM/AC-3 DIGITAL REMOTE
CONTROL
COAXIAL OPTICAL
Y Cb Cr
Enjoying Dolby Pro Logic Surround Sound Enjoying 2 Channel Digital Stereo Sound
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo
by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
•
Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any
connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
•
Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic
Surround by connecting an amplifier and speaker system (right and
left front speakers, a center speaker, and one or two rear speakers).
■
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in
“Enjoying Dolby Digital Sound”. 14
Refer to that amplifier’s instruction manual and set the
amplifier so you can enjoy Dolby Pro Logic Surround sound.
■
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Warning
Do not set the "AUDIO OUT SEL." to “AC-3” on the setting screen unless you are connecting (via the PCM/AC-3 DIGITAL AUDIO OUT
jack) an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as wall as the speaker.
TV
Signal flow
Connection
example
To COAXIAL type
digital audio input
To PCM/AC-3
DIGITAL AUDIO
OUT
Front
speaker
(right) Front
speaker
(left)
coaxial
cable
Amplifier
equipped with a
digital audio input
To VIDEO
OUT
Video
cable
To video
input
Notes:
■ Set “AUDIO OUT SEL.” to “PCM” via the on-screen
displays. 31 , 32
PCM : Pulse Code Modulation
2ch for Analog or Digital prefer connections for
best 2ch or Dolby Surround Sound.
■ Set “AUDIO OUT SEL.” to “PCM” via the on-screen
displays. 31 , 32
PCM : Pulse Code Modulation
2ch for Analog or Digital prefer connections for
best 2ch or Dolby Surround Sound.
VIDEO OUT
S VIDEO
R
L
ANALOG
OUTPUT PCM/AC-3
DIGITAL REMOTE
CONTROL
COAXIAL OPTICAL
Y Cb Cr
To audio input
Front
speaker
(right)
Center speaker
Rear speaker
Front
speaker
(left)
To ANALOG
AUDIO OUT
Connect one or two
rear speakers.
The output sound from
the rear speakers will
be monaural even if
you connect two rear
speakers.
Connection
example
Signal flow
Amplifier equipped with
Dolby Pro Logic Surround
To VIDEO
OUT
Video cable Audio cable
To video input
TV
Optical
digital
cable
Connect either.
To OPTICAL type
digital audio input
31 32
(red) (white)
(red) (white)