Oki FAX 5050 - Manual (Page 65)

Customizing 53
18 MEM./FEEDER SW.: This function controls how
OKIFAX normally transmits fax messages: by scanning
the document into memory first, or by transmitting di-
rectly from the document feeder. Available settings are
FEEDER (default) and MEMORY.
Note: If you are using the MEMORY setting and you send
a large number of faxes in one session, you may
encounter a MEM OVERFLOW error message. If this
occurs often, you can correct the problem either by
adding an optional memory upgrade or by changing to
the FEEDER setting.
2 0 ECM FUNCTION: The error correction mode function
may help your OKIFAX improve communication in areas
where telephone line conditions are marginal. See the
Troubleshooting section of this Handbook for other sug-
gestions if you have communication problems. Available
settings are ON (default) and OFF.
2 1 REMOTE DIAGNOSIS: The remote diagnostics feature al-
lows a service person remotely to dial and service your
OKIFAX. Available settings are ON and OFF (de-
fault).
22 Not used.
23 ONE TOUCH PARAM: This function allows you to acti-
vate the Echo Protection feature for a specific One
Touch key, without changing the normal settings.
Echo Protection can improve communication with a
location in a noisy telephone area. For instructions
on changing One Touch Parameters settings for a
One Touch key, see page 28.
Changing Your User Function Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
The display shows 1:FUNC. PROGRAMMING.
3 Press the Yes ᮤ key. The display shows FUNCTION
NO. [ ].
4 Using the numeric keypad, enter the 2-digit number of
the function you want to change. The display shows the
name of the selected function.
5 Repeatedly press the No ᮣ key until the setting you want
appears in the display.
Note: If you are changing the TX MODE DEFAULT set-
tings, the new settings appear on the lights above the
Yes
ᮤ and the No ᮣ keys
6 Press the Yes ᮤ key to confirm your selection. The
name of the next function setting appears in the
display.
7 Press the Select Function key to finish.
Of5050hw.pm6 4/15/98, 9:32 AM 53