Onkyo DV-C501 - Manual (Page 14)

14
1
2
3
POWER
STANDBY / ON
or
OPEN/CLOSE
or
POWER POWER
OPEN/
CLOSE
CAUTION
Keep your fingers clear of the disc drawer as it is closing to
avoid personal injury.
DVD / VIDEO CD / CD CHANGER DV- C 501
DISC SKIP
1 2 3 4 5
PLAY
STOP PAUSE
SKIP NEXT SELECTION
CD PLAY
DISPLAY DIMMER
DISC SELECT
ON OFF
POWER POWER
STANDBY / ON OPEN/CLOSE
POWER
2
3
DISC 1—5 STANDBY/ON
DISC SKIP /
DISC SKIP
Playing back Discs
This section shows you the basics on how to playback a disc.
Most steps in this manual need to be performed using the
supplied remote controller. The relative buttons are usually
indicated at the beginning of a section.
Basic Playback
■ Preparations
• To view a video disc, switch on your TV set and select the video input the DV-C501 is connected to. See also pages 10, 11
for how to connect the DVD Changer to your TV set.
• If you are also using an amplifier for separate audio playback (see pages 11, 12, 13), switch on the amplifier and select the
input the DV-C501 is connected to.
Connecting to a Wall Outlet and Powering On.
1 Plug the power cable into a suitable wall outlet.
2 Press the POWER button on the main unit to switch it to
Standby mode.
The STANDBY/ON indicator on the main unit lights.
3 Press the STANDBY/ON button on the main unit, or the
POWER button on the supplied remote controller to
switch on the DVD Changer.
The display lights up, and the STANDBY indicator goes
dark.
Press the OPEN/CLOSE button.
The disc drawer opens, and the disc indicator lights up.
(See “DISC INDICATORS ATTENTION” on page 42.)
Place a disc in the front disc tray (DISC 1).
DISC 2 DISC 1
Be sure to insert the disc with the playback side down.
■ Placing discs in the remaining disc trays.
Repeatedly press the DISC SKIP / button
on the main unit to rotate the disc drawer in the
direction of the arrow of the button, and place a
disc in each desired tray (1–5).
Press the OPEN/CLOSE button again.
The disc drawer closes.
Press one of the DISC 1–5 buttons to select the desired
disc on the tray for playback.
Notes:
• The DV-C501 supports two disc sizes.
To avoid damaging your discs or causing
malfunction, be sure to insert the discs
in the correct guide.
• Only use DVD video discs or audio CDs.
Other data carriers may damage your
DVD Changer and/or amplifier/TV set.
Note:
The disc drawer can also be opened when
the DVD Changer is switched off.
Note:
Alternatively, press one of the DISC 1–5
buttons to close the disc drawer and play
the selected disc automatically.
4
OPEN/CLOSE
- 2
- 3
Note:
When you use the DV-C501 for the first
time:
When the DV-C501 is shipped from the
factory, the POWER switch is set to ON
(
ON OFF ). Therefore, when you
plug in the power cable to the AC outlet,
the STANDBY/ON indicator lights up and
the unit enters Standby mode as
described in Step 1-
2 .