Onkyo DV-C501 - Manual (Page 17)

17
Getting Star
ted
Connections
Function Setup
Ad
v
anced Pla
ybac
k
Other
s
Basic Pla
ybac
k
DVD VCD DVD VCD CD
2
1
SLOW
SLOW
PLAY
STOP
PLAY
PLAY
STOP
1 2 3
5 6
7 8 9
+10 0
4
REMOTE CONTROLLER RC - 417DV
SLOW
PLAY
PAUSE/STEP
1 2 3
5 6
7 8 9
+10 0
4
REMOTE CONTROLLER RC - 417DV
STOP
PLAY
Slow-Motion Playback
DVD video discs can be played back in slow motion. This is
done by reducing the playback speed.
Press the or SLOW button during
playback.
By pressing either button repeatedly, you
can cycle through the three available
playback speeds.
1/8 the 1/4 the 1/2 the
normal speed normal speed normal speed
TV screen
1/8 1/4 1/2
1/2 the 1/4 the 1/8 the
normal speed normal speed normal speed
TV screen
1/2 1/4 1/8
■ Resuming Normal Playback
Press the PLAY button to resume
normal playback.
■ Using Frame Step
DVD VCD
While playback is paused, you can step
forward one frame at a time by pressing
the PAUSE/STEP button.
Resuming Playback From the Desired Location
After stopping playback, you can either resume from the
location where it was stopped, or from the beginning of the
current title.
Press the STOP button at the location
where you want to halt playback.
The DVD Changer memorizes this
location.
Press the PLAY button.
The DVD Changer resumes playback
from the location where playback was
stopped.
■ Resuming Playback from the Beginning of the
Current Title
If you do not wish to resume playback from the position where
it was stopped, proceed as follows. In this case, playback will
be started from the beginning of the last title you played back,
or from the beginning of the disc.
1. Stop playback by pressing the STOP button twice.
The second press of the STOP button
will clear the DVD Changer’s location
memory.
2. Press the PLAY button.
The location where playback is started
depends on the type of disc you are using:
DVD video disc: Playback starts from the
beginning of the current title.
Video CDs/audio CDs: Playback starts
from the beginning of the disc.
• To resume playback a DVD video disc from the beginning
of the disc, press the STOP button, open and close the
disc tray by pressing the OPEN/CLOSE button, then
press the
PLAY button.
Notes:
• The DVD Changer’s location memory is also cleared when you:
– unplug the DVD Changer from the wall outlet after stopping
playback.
– open the disc drawer.
– adjust/change the Parental Lock function (see page 37) or select
another disc menu language (see page 34).
• Depending on the disc, playback may not be resumed at the exact
location where it was stopped.
• Other settings you change via the on-screen menu while a location
is memorized may be available only after the memory is cleared.
Only for the DVD
video disc
PAUSE/STEP