Operator panels, Pg l26, Operator panel – Olivetti PG L26 Special User Manual
Page 17: Led indicators, Operator panel led indicators, Perator, Panels
PG L26/PG L26 Special User’s Guide – Operator panels > 17
O
PERATOR
PANELS
This chapter describes the function of the operator panel on your
printer. It is useful to describe the Status Monitor software at this
point as it provides the PG L26 status information and the
equivalent of the menu control panel on the PG L26 Special. (See
“Printer Drivers” for installation of the Status Monitor.)
PG L26
O
PERATOR
PANEL
The PG L26 operator panel consists of 4 indicating LEDs and an
Online button. From left to right, the LEDs indicate Power On,
Ready, Manual feed and Error.
LED
INDICATORS
The LED indicators show the status of the printer and have five
operating conditions as follows:
>
Indicator off
>
Indicator on
>
Flash 1 - slow blink - 1 long flash every 4 seconds
>
Flash 2 - blink - 1 flash per second
>
Flash 3 - rapid blink - 4 flashes per second.
All four LED indicators come on momentarily when power is
switched on using the main power switch.