Olivetti PG L26 Special - Manual (Page 29)

PG L26/PG L26 Special User’s Guide – Operator panels > 29
RS232C menu
This menu controls the operation of the printer’s RS232C data
interface.
USB menu
This menu controls the operation of the printer’s USB data
interface.
Network menu
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
RS232C MENU
ITEM DEFAULT REMARKS
RS232C ENABLE Only when RS232C is
installed
FLOW CONTROL DTR HI Only when RS232C is
installed
BAUD RATE 9600 Only when RS232C is
installed
DATA BITS 8 BITS Only when RS232C is
installed
PARITY NONE Only when RS232C is
installed
MIN. BUSY TIME 200mSEC Only when RS232C is
installed
OFF REC DISABLE Only when both RS232C
and PSE are installed
USB MENU
ITEM DEFAULT REMARKS
USB ENABLE
SOFTWARE RESET DISABLE
OFF REC DISABLE Only when PSE is
installed
SERIAL NUMBER ENABLE
NETWORK MENU
ITEM DEFAULT REMARKS
TCP/IP ENABLE Only when NIC is installed
NETBEUI ENABLE Only when NIC is installed
NETWARE ENABLE Only when NIC is installed