Olivetti PG L26 Special - Manual (Page 39)

PG L26/PG L26 Special User’s Guide – Operator panels > 39
USB menu
This menu controls the operation of the printer’s USB data
interface.
Network menu
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
USB MENU
ITEM DEFAULT REMARKS
USB ENABLE
SOFT RESET DISABLE
OFF REC DISABLE Only when PSE is
installed
SERIAL NUMBER ENABLE
NETWORK MENU
ITEM DEFAULT REMARKS
TCP/IP ENABLE Only when NIC is installed
NETBEUI ENABLE Only when NIC is installed
NETWARE ENABLE Only when NIC is installed
ETHERTALK ENABLE Only when NIC is installed
FRAME TYPE AUTO Only when NIC is installed
IP ADDRESS SET AUTO Only when NIC is installed
IP ADDRESS Only when NIC is installed
SUBNET MASK Only when NIC is installed
GATEWAY ADDRESS Only when NIC is installed
INITIALIZE NIC? Only when NIC is installed
WEB/IPP ENABLE Only when NIC is installed
TELNET ENABLE Only when NIC is installed
FTP ENABLE Only when NIC is installed
SNMP ENABLE Only when NIC is installed
LAN NORMAL Only when NIC is installed
HUB LINK SETTING AUTO
NEGOTIATE
Only when NIC is installed